Heatflex Cables Private Limited

This cable is designed and manufactured for use in continuous flexing, twisting and other features where flame, abrasion, chemical, moisture, impact, tearing and temperature extremes are encountered.

We are offering quality tested range of Overall Aluminum Mylar Shielded Unarmored Instrumentation Cable that is known for its electrical properties and disturbance free operation. In this, the conductor is constructed from bare, annealed copper and insulation of polyvinyl chloride. These are flame retardant and have shielding of aluminum foil and polyester shield, which is helically wrapped to provide complete coverage with a tinned copper drain wire. This is two gauge sizes smaller than the circuit conductor.

We are engaged in offering supreme quality Overall Aluminum Armored Instrumentation Cable, which is preferred for use in instrumentation computer and control application where signals are transmitted in excess of 100-mile volts except in areas where high voltage and current sources create excessive noise interference. If required, overall shielding may be of annealed tinned copper braiding/ polyaluminum drain wire. Braiding ATC shield has high tensile strength and provides better coverage in flexing applications. These cables are easier to terminate. This provides effective shielding; crosstalk and noise are kept to an absolute minimum.

We are offering quality tested range of Overall Aluminum Mylar Shielded Unarmored Instrumentation Cable that is known for its electrical properties and disturbance free operation. In this, the conductor is constructed from bare, annealed copper and insulation of polyvinyl chloride. These are flame retardant and have shielding of aluminum foil and polyester shield, which is helically wrapped to provide complete coverage with a tinned copper drain wire. This is two gauge sizes smaller than the circuit conductor.

The Individually Aluminum Mylar Shielded Armored Instrumentation Cable is suited for preventing the sorting of adjacent shield and minimizes the cross talk and ground loops. A tinned copper drain wire is installed to provide continuous contact with the shield and allows for connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield.

1.1 KV grade, ATC (Annealed Tinned Copper) conductor confirming to IS:8130/1984 class-V, Melinex taped, VIR (Vulcanized Rubber) type IE-1 insulated or EPR (Ethylene propylene Rubber) type IE-2 insulated confirming to IS:6380/1984, colour coded, cores laid-up with suitable center filler & overall TRS (Tough Rubber) type SE-1/SE-2 sheathed or HD-HOFR (Heat, Oil Resisting & Flame Retardant) PCP (Poly-Chloroprene) Type SE-3/SE-4 sheathed confirming to IS:6380/1984, Flexible Trailing cables confirming to IS:9968 (pt-I)1988.

UNIQUE make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.1100 v grade multistrand Annealed bare copper conductor, extra flexible PVC insulated and sheathed flat cable.These wires are suitable for both internal as well as panoramic elevators. The Lift Flat Cables come with suspended length of up to 45 meters. We make use of contemporary equipment while manufacturing these cables.

Range: 0.5 sq.mm to 2.5 sq.mm up to 16 coreAvailable Range: UNIQUE make 1100 volt. Grade multistrand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

• 1.5sqmm & 2.5sqmm upto 24 core
• 4sqmm to 95sqmm upto 4 core

Application

The Lift Flat Cables are used while installing elevators in high rise buildings. These wires are made from high grade multi strand annealed bare copper conductor with extra flexible PVC insulated and sheeted flat cable. Our Lift Flat Cables are majorly preferred for high-rise buildings, commercial buildings and malls.Elevator/Flat form cable is a flat traveling PVC cable used in conveyor and hoist equipment. This cable is suitable for internal and panoramic elevator application with a freely suspended length up to 45 meters

1100 Volt. Grade Aluminium/Copper conductor XLPE/PVC insulated, cores laid up together, PVC inner sheathed type ST-1, G.I. wire/strip armoured outer PVC sheathed 600/1100 volts grade cable generally conforming to IS:7098/Part- I/1988&1554/pt-I/1988.Up to 400 sq. mm x 3.5 core & 1000 sq. mm x single core in aluminium cables 1.5, 2.5, 4 & 6 sq. mm, up to 61 core in copper cables.

Application

Armoured cable is the name given to any electrical cable constructed with a layer of aluminium wire armour or steel wire/strip armour. The armour sits below the sheath of the cable to provide protection for the conductor and insulating layers.

1100 Volt. Grade Aluminium/Copper conductor XLPE/PVC insulated, cores laid up together, PVC inner sheathed type ST-1, G.I. wire/strip armoured outer PVC sheathed 600/1100 volts grade cable generally conforming to IS:7098/Part- I/1988&1554/pt-I/1988.Up to 400 sq. mm x 3.5 core & 1000 sq. mm x single core in aluminium cables 1.5, 2.5, 4 & 6 sq. mm, up to 61 core in copper cables.

Application

Armoured cable is the name given to any electrical cable constructed with a layer of aluminium wire armour or steel wire/strip armour. The armour sits below the sheath of the cable to provide protection for the conductor and insulating layers.

Annealed Tinned Electrolytic high conductivity copper solid conductor, Foam PE insulated, cores twisted together in a form of pair. Melinex taped, Shielded with aluminium mylar taped (25% overlap) and screened with tinned copper (90%), taped again & overall PVC sheathed type ST-2 cable (Purple Colour) Profibus cables.

Range: upto 400 sq. mm x 3.5 core (Al/Cu)Application

Standard profibus DP cable for stationary application and specially designed for last assembly. This cable complies exactly with the PROFIBUS DP cable specifications (200m at 1.5 Mbps or 100m at 12 Mbps) Due to its double shielding and acceptable shield resistance it is suitable for installation in EMC demanding areas

We are providing Thermocouple Cables to our customers providing  best quality to our customers at reasonable rates.