Heatflex Cables Private Limited

The Telephone Switch Board Wires are used while interconnection of telephone, telegraph and electronic equipment in domestic and commercial buildings. These switch board wires are light in weight, smaller in diameter and excellent in chemical, moisture and heat resistance. It is also used in switch board wiring, industrial control panels and in various types of control apparatus.

Unarmoured/ Armoured Communication Telephone Cable, Annealed Tinned Electrolytic High Conductivity Copper Conductor PVC Insulated, Each Wire Twisted with its make to form a pair and each pair Twisted and Hunched together in concentric layers to minimise Cross Talk, Moisture Proof Untapped/Melinex Taped, PVC Sheathed with a Nylon Rip Cord confirming to 'TEC" specification No. G/WER/-0602 MAY 94.

Range:- 1 Pair to 100 Pair ( 0.41,0.51 & 0.61 mm)

The Unarmored Telephone Cables have strong flexible steel jacket underneath the outside covering. These are preferred for buried installation or underground installation where rodents might gnaw the cable. The steel armor than protects the inner jacket and signal wires from damage. These cables are installed where mechanical protection is not required.

We are engaged in designing supreme quality XLPE LT Power Cables that are installed in underground and over head transmissions. Our XLPE LT power cables have minimal dielectric losses, better resistance to most chemicals, oils, acids etc. It has a tough and resilient sheath with excellent fire-resisting qualities. Further, it has complete protection against most forms of electrolytic and chemical corrosion.

Features:

• Provides for excellent mechanical, electrical, thermal and chemical properties
• Can handle higher current ratings that make it possible for using one lower size of cable in comparison to PVC
• Feature superior emergency overload withstand capacities with overload temperatures of up to 1300 deg C
• Has better ageing property with resistance to deformation under load conditions
• Can retain flexibility down up to 400 deg C
• Features higher short-circuit rating that allows withstanding short-circuit temperatures up to 2500 deg C
• Offers superior resistance to most chemicals like acids, bases & oils
• Very less dielectric losses
• Offers easy jointing & termination
• Allows easy handling during installation as these cables are of light weight finish

The Multicore Rubber Cables are used for supplying power in demanding applications in the lighting industry, generators, battery leads, switchboards, welding flex, industrial applications and submersible pumps. These cables are impeccably flexible, easier to install and suitable for permuted deep-water installation, such as submersible plants. It is a UV resistant sheath that allows installation in outdoor applications too. These cables also offer resistance against chemicals and oils. VIR/TRS/EPR/PCP & CSP Trailing Multi-core Rubber Cables

Features:

• 1100 V grade multi stand Annealed bare copper conductor, extra flexible PVC insulated and sheathed flat cable.
• UNIQUE make 1100 volt. Grade multi stand annealed tinned copper conductor, EPR insulated & PCP/CSP sheathed Flat Cable.

Application:

• Elevator/Flat from cable is a flat traveling PVC cable used in conveyor and hoist equipment. This cable is suitable for internal and panoramic elevator application with a freely suspended length up to 45 meters.

The Welding Cables are used for the transmission of high currents from the electric welding machine to the welding tool. These are suited for flexible use under rough conditions such as on conveyor systems, assembly lines, machine tools, ship, building, motor car manufacturing and in manually and automatically operated line, spot welding machines. The cables can work under high voltage and is constructed from annealed bare copper/aluminum conductor. Our cables are highly durable and withstand tough working conditions. These are widely installed in welding workshops.

General Welding Cables are designed to withstand tough weather conditions. Our cables can perform even while exposure to oil, acids, alkalis, flame and moisture. These wires go through stringent quality tests under the supervision of qualified professionals. These are available in several standard and customized specifications.

Silicon Fiber Glass Braided Cables is the best alternative to PVC, plastic and rubber insulated wire, widely used in high temperature applications. These cables have their prime applications in steel mills, foundries, glass factories, etc. Ensure overall abrasion resistance coverage, these cables are impregnated with high class insulating thermosetting varnish that can sustain wide range of temperature from 70 to 200 degree Celsius.

With ability to retain excellent di- electric properties when burnt, these braided cables are flame retardant and self-extinguishing. In addition to this, these cables are also resistant to fungus, UV radiations, corona discharge, acids and manganese. These cables are made with tinned copper stranded wires that are wounded twice and overlapped with polyester films braided with fiberglass.

Description:-

• 1.1 KV Grade, Multistrand Annealed Tinned Copper (ATC) Conductor As per IS: 8130/1984 class-V, Melinex Taped, Silicon Rubber Insulated type (IE-5) As per IS: 6380/1984 & overall Fiber glass Braided with silicon varnished Rubber Flexible Cable for200°CAsperIS:9968/Pt-l/1988
• Tinned Copper stranded wires twice wounded opposite and well overlapped with polyester films braided with fibreglass yarn and impregnated with high class insulating thermosetting varnish flexible up to temperature from 70"C to 200°C. Resists moisture chemicals, flames fungus radiation, corona discharged and acids ozone attack and even manages to retain excellent de electric properties when burnt

Application:- Typical industrial applications include food processing packaging, refrigeration furnaces and lighting

Fibre glass cables is used extensively as motors, transformers, lead wire and at places where conventional PVC wire is not suitable.

Available Range:-

• 1.5 sq.mm to 300 sq.mm (Single & Multi Core)
• 0.5 sq.mm to 630 sq.mm. (Single & Multicore)

The Multicore Rubber Cables are used for supplying power in demanding applications in lighting industry, generators, battery leads, switchboards, welding flex, industrial applications and submersible pumps. These cables are impeccably flexible, easier to install and suitable for permuted deep water installation, such as submersible plants. It is UV resistant sheath that allows installation in outdoor applications too. These cables also offer resistance against chemicals and oils. The cable is offered in several vibrant colors, such as brown, blue, green, yellow and black.

VIR/TRS/EPR/PCP & CSP Trailing Multicore Rubber Cables

Available Range:- Up to 400 sq. mm

We develop quality assured Airport Lead Cables that is made from steel wires, which are layered in helix form. These are used for connecting the constant current regulation and for the isolating transformers and between them. This cable can be buried providing there is an extra mechanical protection. These cables are developed under the international norms and regulations. It is flame resistant, halogen-free and can bear harsh weather conditions. These cables are available in standard as well as in customized forms as per the suitability of our clients.

Features:

• Halogen-free
• Made from steel wires with layered in a helix
• Rigid composition
• Can bare high & low temperature
• Flame resistant
• Impact resistant
• Can withstand tough weather conditions
• Oil resistant

Other details:

• Extension leads of different metals but having similar EMF output between 0°c to 100°c connected between Thermocouple metals junction and the measuring instruments are called compensating cables which are generally recommended as solid conductor leads.

Application:

• Different metal pairs generate different EMFs which is proportionate to the hot junction and the point where it is measured. Common combination of thermocouple metals.

Available Range:

• K-Chromel/AIumel-Most commonly used.
• T-Copper /Constantan- for low temperature & cryogenic applications.
• J-Iron/ Constantan-Used in reducing atmosphere
• E -Chromel/ Constantan-Highest EMF output.
• R-(Platinum-13% Rhodium)/ Platinum & S-(Platinum-10% Rhodium) / Platinum-very High temperature measurements.
• B- (Platinum-30% Rhodium)/ Platinum mainly used in glass industry.
• Different color codes of cores and sheathing as per international practices are used to denote the various thermocouple cables.

The Welding Cables With HOFR Covering (Cu-Al) are extensively demanded over general welding cables as these come with a sheathing of heat oil fire resistant copper-aluminum. It is safer and is rigorously verified on various international parameters.

• Annealed Bare Copper/Aluminum conductor as per IS: 8130/1984, TRS / HD HOFR sheathed as per IS: 6380/84 Flexible Welding Cable to IS: 9857/1990.

Application:

• For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship, building, for manually and automatically operated line and spot welding machines.

The HR Cable do not heat up and are also chiefly demanded in reactor & process control, navy sector, high-temperature control value furnace & oven.
We are engaged in offering finest HR (Heat Resistant) Cables that are demanded in several industries, such as atomic energy satellite, computers, heavy duty motors, aircraft radar & navigation etc. These cables are rich in EMC characteristics and flexible at low temperature. Our HR cables are completely protected against mechanical damage and can withstand extreme temperatures.

This makes the rescue mission a lot easy to execute. Our fire survival cables have the unique ability to extend functionality for circuit and data integrity in extreme fire situations. These cables are made from inorganic materials that do not burn, emit smoke or gas and survive harsh fire explosions. These cables are developed for life-critical situations and are in accordance to fire management systems.

Specifications

• Grade 1: Remains operation up to up to 30 minutes when subjected to 830 deg. temperature
• Grade 2: Can last 180 minutes when subjected to 930 deg. C temperature         

The Copper Armoured Telephone Cables are made from solid plant copper conductor, color-coded polyethylene bedding, galvanized steel wire armor and black or gray polyethylene or external grade PVC sheath. Our wires are made under the supervision of qualified professionals and go through stringent quality checks.

Application:

• These are widely used for external connection of telephone systems and other communications equipment where the added protection of steel wire armoring is needed. It is also installed for primary and secondary underground (direct buried) distribution networks.

The Welding Cables are used for the transmission of high currents from the electric welding machine to the welding tool. These are suited for flexible use under rough conditions such as on conveyor systems, assembly lines, machine tools, ship, building, motor car manufacturing and in manually and automatically operated line, spot welding machines. The cables can work under high voltage and is constructed from annealed bare copper/aluminum conductor. Our cables are highly durable and withstand tough working conditions. These are widely installed in welding workshops.

The Welding Cables with HOFR Covering (Cu-Al) are extensively demanded over general welding cables as these come with sheathing of heat oil fire resistant copper- aluminum. It is safer and is rigorously verified on various international parameters.

Description:- Annealed Bare Copper/Aluminium conductor as per IS: 8130/1984, TRS / HD HOFR sheathed as per IS: 6380/84 Flexible Welding Cable to IS: 9857/1990.

Application:- For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship, building, for manually and automatically operated line and spot welding machines.

Available Range:- 16 sq.mm to 120 sq.mm

The CCTV Cables are used while installing security systems and professional cameras. These serves as composite structure of video and audio wires that are competent of carrying video signal (75 ohms coaxial) with audio 12 volts power wire of 14/40 SWG.

The cables are available in both standard and customized forms, meeting the requirements of clients. In this, the coaxial cables form the video signal carrier and other cores form the power carrier. These are capable to transmit complete video frequency range with minimum distortion or attenuation.

Range:- 3+1, 4+1 & 6+1

Available Types:

• Armoured Pulse Code Modulation Cables
• Unarmored Pulse Code Modulation Cables

Features:

• Unique make PCM Cables, Annealed Tinned copper conductor, PE insulated and PVC sheathed. Individual & Overall shielded with Aluminum backed mylar taped with Annealed tinned copper conductor drain wire in continuous contact with aluminum side of tape, Armoured/Un-armoured Cable conforming to BS:5308/11/1986 & IS: 1554/Part-I/1988.    

Description:- Unique make PCM Cables, Annealed Tinned copper conductor, PE insulated and PVC sheathed. Individual & Overall shielded with Aluminium backed mylar taped with Annealed tinned copper conductor drain wire in continuous contact with aluminium side of tape, Armoured/Unarmoured Cable conforming to BS:5308/11/1986 & IS: 1554/Part-I/1988.

Available Range:- 2 pair to 63 pair (0.5mm, 0.6mm, 0.7mm, 0.9mm)

RS Series Cables are the most common cables in the computer networking. These are considered as the advanced computer cables designed and manufactured in compliance with advanced technology using conductors, insulation and sheathing.

These cables ensure quick and smooth flow of data across the network systems. The cables of recommended standard series are highly protective for safe and secure flow of sensitive data in a network system. All these wires are completely resistant to corrosion, weather, radiations, ozone attack and manganese for better results. There are different ratings and capacities in which these cables are available for clients as to suit their unique requirements.

The Networking Cables are used while connecting one network to another. It is also used for connecting two or more computer to share devices, such as printer and scanner. It is unshielded and covered by insulating sheath. In this, a multi-pair, which generally consists of high performance cable is used chiefly for data transmission.

Application:- A multipair (usually 4 Pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Category 5E is recommended for all new and existing installations, supports a frequency range of up to 100MHZ and is designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet).

Description:- Unshielded/shielded twisted pair UTP/FSTP LAN (Computer) cable.

Range:- CAT 5, CAT6, CAT 5E (FSTP)